Stackable with PCIe/104 & FPE Expansion, Extended Temperature - 40°C to 85°C

PERFECTRON, an innovative industrial computing and embedded system solution provider, an innovative industrial computing and embedded system solution provider has launched a new EBX SBC – OXY5737A. The OXY5737A based on Intel® Haswell QM87 chipset, is powered by Intel® 4th generation Core™ i7/i3 processor onboard. It operates effectively under -20 to 70°C (-40 to 85°C optional) and is a perfect solution for military, transportation, factory automation and digital signage applications. 

More key functions are featuring in the stacking PCIe/104 expansion ability, flexible I/O functions for triple display ports (2 x DP, LVDS, DVI-I), SATA 3.0 SSD soldering on board and 9~36V DC-in power support. 

Critical components soldering onboard

 To achieve high standard of shock and vibration demand, OXY5737A EBX SBC was designed with components soldering onboard including CPU, NANO SATA 3.0 SSD and Swissbit XR-DIMM. This not only enhances the conductivity for circuit dissipation but also improves the robustness of motherboards. Benefits of soldering:
• High density 
• Heat conduction
• Maximum Resistance to Shock and Vibration 
• Lower resistance and inductance at the connection
• Better and more predictable high-frequency performance
• High EMC compatibility (lower radiated emissions) and the smaller lead inductance

Stackable with PCIe/104 & FPE expansion
Known for application’s ruggedness, reliability, sealing properties, and compactness characteristics, PCIe/104 & FPE connectors are ideal for high-end electronic equipment used in extreme environmental conditions. Our rugged connectors have a functional life greater than 10,000 mating cycles, with easy connect/disconnect and blind mating. The PCIe/104 standard specifies Samtec’s Q2™ QMS/QFS Series in a three bank (156-pin) orientation for module stacking. Samtec specifically designed the QMS/QFS Series with a 15.24 mm stack height for top and bottom board stacking. Q2™ has triple the wipe of many high speed mezzanine interconnects making it appropriate for rugged applications.

Mechanical protection up to 5Grms vibration & 50G shock
Mechanical vibration and shock are present in varying degrees in virtually all locations where equipment and people function. The adverse effect of these disturbances can range from negligible to catastrophic depending on the severity of the disturbance and the sensitivity of the equipment. Furthermore, the performance and ruggedness requirements of military systems, transportation applications, factory automation, etc. continue to climb. To meet those demands, OXY5737A was designed with mechanical protection up to 5Grms vibration & 50G shock that enables the system to operate in harsh environments.

Wide range DC input 9V~36V with ignition on /off by software control
Unstable voltage and current has always been a critical issue for systems in industrial and transportation applications, OXY5737A supports wide range DC input 9V~36V that protects system from damage causing by unexpected voltage and current and makes sure it operates normally. Furthermore, the software with adjustable power on/off delay time function is developed to protect PC system from damage causing by surge/ under voltage or over current problems.

Extended temperature support -40°C to 85°C
OXY5737A is a model born for extreme temperature environments by proven outstanding operation performance under crucial conditions. Powered by Intel® 4th generation Core™ i7/i3 processor, it survives an extended market-leading operating temperature range of -40°C to 65°C without processor throttling (reduced frequency) and continuously presents superior high performance.
 

Main Features:

• • Intel® 4th Generation Haswell Core™ i7/i3 processors on board
  • Stackable Expansions : 1 x PCIe_16 (FPE), 4 x PCIe_1 (PCIe/104)
  • Swissbit XR-DIMM up to 8 GB RAM • Onboard nano SATA 3.0 SSD up to 32 GB
  • PenMount 6000 Resistive Touch Controller on board
  • Multi-Displays by 2 x DP, 1 x DVI-I, 1 x Dual Channel 24-bit LVDS
  • 2 x mPCIe Expansion slot (One Co-Layout with mSATA)
  • 2 x PCIe Intel® Gigabit Ethernet
  • 4 x USB 3.0, 2 x USB 2.0, 6 x COM , 2 x SATA III 
  • +9V~36V DC-in with power delay on/off
  • Extended Temperature -40 to 85°C